Modern LED Ceiling Light | Sleek Overlapping LED Ring Design In Two Or Three Ring Diameters

Overlapping rings do something a single disc cannot, which is give a flush ceiling light depth. The rings sit at slightly different heights and cross each other, so from below there is structure and shadow rather than one flat lit circle, and the fitting reads as sculpture on a ceiling that would otherwise be a completely empty plane above the furniture.

Both sizes are only seven centimetres deep despite that, which is what keeps them usable in a room with a standard or low ceiling. Iron carries the fixing and the acrylic diffuses the LED evenly, so nothing shows as a bright point and the whole ring glows along its length rather than only where the source sits behind it, which is the usual failure of a cheap ring fitting.

Buy it now and size it to the room. The two ring version at thirty four centimetres draws twenty watts and covers ten to twenty square metres, and the three ring version at fifty two draws thirty. Both are integrated LED, so there is no bulb to buy or replace, in warm or cold white. This is a hardwired IP20 fixture for dry indoor use and should be fitted by a qualified electrician.

• Form: overlapping LED rings in iron and acrylic, only 7 cm deep
• Sizes: 34 cm with 2 rings at 20 W, or 52 cm with 3 rings at 30 W
• Light: integrated LED in warm or cold white, no bulb required
• Coverage: roughly 10 to 20 square metres
• Rating: IP20, for dry indoor use, AC 220 to 240 V
• Installation: hardwired, fit by a qualified electrician, isolate at the breaker